Inspection And Testing/Status Polaroid/寶麗來驗廠檢驗和測試要求

1、Are there documented procedures for defining inspection and test methods?
   廠商是否提供文件來規定檢驗和檢驗方法？

2、Does the supplier ensure that incoming product is not used or processed unit it has been inspected and verified as conforming to specified requirements?
   廠商是否提供規范來保證被檢測產品不被使用？

3、Does the supplier inspect, test and identify product as required by the quality plan or documented procedures?
   廠商是否依據品質計劃及規范的需求來進行檢驗和測試？

4、Does the supplier utilize final inspection and testing?
   廠商是否執行最終檢測及測試？

5、Does the supplier utilize outgoing product inspection and testing such as Out of Box Audits?
   廠商是否進行出貨檢驗，如：開箱抽樣檢驗和測試？

6、Does the supplier utilize extended reliability testing?
   廠商是否采取擴展性可靠度測試？

7、Does the inspection and test process assure outgoing products meet Dell LRR and IFIR goals?
   檢驗和測試操作能否保證我司出貨產品的LRR和IFIR的目標要求？

8、Are there procedures that address product inspection and test status?
   是否有作業規范來說明產品檢驗和測試的狀態？

9、Are there procedures and practices in place to assure product traceability through all stages of production?
   是否有相應的規范和慣例來追蹤所有工位上的產品？

10、Is the conformance or nonconformance of a product’s inspection or test status identified? (by markings, tags, inspection records, test software, physical location, etc.)
   能否對良品和不良品的檢驗狀態做明確的定義和識別？

11、Does the system assure only material that has passed specified inspections or tests is utilized or sold?
   是否有規范的系統來保證對來料做通過的規定檢驗？

12、Are there records which give evidence that the product has passed inspection and/ or test with defined acceptance criteria?
   是否有記錄來證明產品已通過合格檢驗？

13、Is gage R&R performed prior to mass production or after process set-up change?
   量產前或改變制程后是否執行GRR?

14、Is golden sample/template available for inspection/test?
   是否有檢驗/測試的樣品/模板?

15、Is golden sample/template properly identified (P/N, Rev., S/N), checked and stored?
   樣品/模板是否有適當標示區分(料號,版次,S/N),審核和保存?

16、Are the inspection/test record/report reviewed and approved by the authorized personnel for product release?
   產品放行前檢驗或測試記錄,報告是否經審核和核準?

17、Does the supplier test coverage meets customer minimum requirement?
   供應商測試范圍是否符合客戶最低要求?

18、Are the test set-up sufficient and adequate to ensure the product quality? (e.g. hardware, equipment, software/revision, fixture, …..)
   產品的測試是否適當和充分以保証產品質量?(如硬件,設備,軟件/版次,夾治具)